View HSD070IDW1-A10_4404324.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hannstar display corp. document title HSD070IDW1-A10 specification for page no. 1 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. to date 2008/08/21 customer acceptance specification model : HSD070IDW1-A10 accepted by: signature date proposed by: technical service division signature date note:1. please contact hannstar display corp. befor e designing your product based on this module specification. 2.the information contained herein is presented mer ely to indicate the characteristics and performance of our products. no responsibility is a ssumed by hannstar for any intellectual property claims or other problems that may result from application based on the module described herein. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 2 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. record of revisions rev. date sub-model description of change 1.0 2008/08/21 a10 preliminary product specification was first issued. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 3 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. contents 1.0 general description . p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics . p.6 4.0 block diagram .. .. p.10 5.0 interface pin connection . p.11 6.0 electrical characteristics . p.15 7.0 reliability test items p.23 8.0 outline dimension . p.24 9.0 lot mark ... p.26 10.0 package specification . p.27 11.0 general precaution . p.28 www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 4 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 1.0 general description 1.1 introduction hannstar display model hsd070idw1-a is a color acti ve matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorph ous silicon tft as a switching device. this model is composed of a tft lcd panel, a driving circuit and a back light system. this tft lcd has a 7.0 (16:9) inch di agonally measured active display area with wvga (800 horizontal by 480 vertical pixe l) resolution. 1.2 features 7 (16:9 diagonal) inch configuration 6 bits + frc driver with 1channel ttl interface led backlight up/down, left/right reversion selection rohs compliance 1.3 applications mobile nb digital photo frame multimedia applications and others av system 1.4 general information item specification unit outline dimension 165.0 x 104.0 x 5.1 (typ.) mm display area 153.6(h) x 86.64(v) mm number of pixel 800 rgb(h) x 480(v) pixels pixel pitch 0.192(h) x 0.1805(v) mm pixel arrangement rgb vertical stripe display mode normally white surface treatment antiglare, hard-coating(3h) with ewv film weight 130 (typ.) g back-light single led (side-light type) power consumption b/l system 1.68(max.) w 1.5 mechanical information item min. typ. max. unit horizontal(h) 164.7 165.0 165.3 mm vertical(v) 103.7 104.0 104.3 mm module size depth(d) 5.1 5.4 mm weight (without inverter) 130 g www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 5 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note vcc -0.3 6.0 v gnd=0 v gh 0.3 40 v gnd=0 v gl -20 0.3 v gnd=0 av dd 0.5 15 v agnd=0 power supply voltage v com 0 6 v logic signal input level v i -0.3 vcc +0.3 v 2.1.2 back-light unit item symbol typ. max. unit note led current i l 140 ma (1) (2)(3) led voltage v l 10.5 12 v (1) (2)(3) note (1) permanent damage may occur to the lcd module if beyond this specification. functional operation should be restricted to th e conditions described under normal operating conditions. (2) ta =252 (3) test condition: led current 140 ma. the led lif etime could be decreased if operating il is larger than 140ma 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa -20 70 storage temperature t stg -30 80 www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 6 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 400 500 (1)(2) rising t r 5 7 response time falling t f 20 28 msec (1)(3) white luminance (center) y l 160 200 cd/m 2 (1)(4) (i l =140ma) w x 0.260 0.310 0.360 color chromaticity (cie1931) white w y =0 normal viewing angle 0.280 0.330 0.380 l 60 70 hor. r 60 70 u 40 50 viewing angle ver. d cr>10 50 60 (1)(4) brightness uniformity b uni =0 70 % (5)(7) optima view direction 6 o clock (6) 3.2 measuring condition measuring surrounding: dark room led current i l : 140ma ambient temperature: 252 o c 15min. warm-up time. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size: 20 ~ 21 mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 7 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. note (1) definition of viewing angle : note (2) definition of contrast ratio (cr): measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 8 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. note (3) definition of response time: sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 9 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. note (5) definition of brightness uniformity luminance uniformity = 100% note (6) rubbing direction (the different rubbing direction will cause the different optimal view direction. note (7) measured at the brightness of the panel when all t erminals of lcd panel are electrically open. (min luminance of 9 points) (max luminance of 9 points) 16.7% 50% 83.3% 16.7% 50% 83.3% y 1 y 2 y 3 y 4 y 5 y 6 y 7 y 8 y 9 www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 10 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 4.0 block diagram 4.1 tft lcd module 4.2 pixel format 1,1 1,800 480, 800 lcd display area 2,1 1,2 1,3 1,4 480 lines 800 pixel (2400 dots) 480,1 r r r b g 1 pixel scan driver source driver lcd panel input fpc led cn1 cn2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 11 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 5.0 interface pin connection 5.1 tft lcd module cn2 (input signal): fpc down connector, (fh28-60s-0 .5sh (hirose), 60pin,pitch = 0.5mm) terminal no. symbol i/o function 1 agnd p analog ground 2 avdd p analog power 3 vcc p digital power 4 r0 i data input(lsb) 5 r1 i data input 6 r2 i data input 7 r3 i data input 8 r4 i data input 9 r5 i data input 10 r6 i data input 11 r7 i data input(msb) 12 g0 i data input(lsb) 13 g1 i data input 14 g2 i data input 15 g3 i data input 16 g4 i data input 17 g5 i data input 18 g6 i data input 19 g7 i data input(msb) 20 b0 i data input(lsb) 21 b1 i data input 22 b2 i data input 23 b3 i data input 24 b4 i data input 25 b5 i data input 26 b6 i data input 27 b7 i data input(msb) www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 12 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 28 dclk i clock input 29 de i data enable signal 30 hsd i horizontal sync input.negative polarity 31 vsd i vertical sync input.negative polarity 32 mode3 i de/sync mode select .normally pull high h:de mode.l:hsd/vsd mode 33 rstb i global reset pin.active low to enter reset state.su ggest to connecting with an rc reset circuit for stability . normally pull high. 34 stbyb i standby mode,normally pull high stbyb="1",normal operation stbyb="0",timming contr ol ,soruce driver will turn off,all output are high-z 35 shlr i source right or left sequence control.shlr="l",shif t left:last data=s1<-s2s1200=first data shlr="h",shift right:f irst data=s1->ss2s1200=last data www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 13 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. terminal no. symbol i/o function 36 vcc p digital power 37 updn i gate up or down scan control. updn="l" , down shift : g1->g2->g480 ; updn="h", up shift: g1<-g2<-g480 38 gnd p digital ground 39 agnd p analog ground 40 avdd p analog power 41 vcomin i for external vcom dc input(optional) 42 dith i dithering setting dith="h " 6bit resolution (last 2 bits of input data turncated) dith="l" 8bit resolution (default setting) 43 nc - not connect 44 nc - not connect 45 v10 p gamma correction voltage reference 46 v9 p gamma correction voltage reference 47 v8 p gamma correction voltage reference 48 v7 p gamma correction voltage reference 49 v6 p gamma correction voltage reference 50 v5 p gamma correction voltage reference 51 v4 p gamma correction voltage reference 52 v3 p gamma correction voltage reference 53 v2 p gamma correction voltage reference 54 v1 p gamma correction voltage reference 55 nc - not connect 56 vgh p positive power for tft 57 vcc p digital power 58 vgl p negative power for tft 59 gnd p digital ground 60 nc - not connect www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 14 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 5.2 back-light unit cn1 led power source ( bhsr-02vs-1 ) mating connector: ( sbht-002t-p0.5 ) terminal no. symbol function 1 vl led power supply (high voltage) 2 gl led power supply (low voltage) www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 15 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note vcc 2.7 3.0 3.5 v v gh 14.5 15 20 v v gl -10 -7 -6.5 v supply voltage av dd 9.85 10 10.15 v vcom vcomin - 3.9 - v v ih 0.7 vcc - vcc v note (1) input signal voltage v il 0 - 0.3 vcc v i dd - 5.426 - ma vcc =3.0v i add - 24.1 - ma av dd =10 v(black) i gh - 0.128 - ma v gh =15v current of power supply i gl - 0.344 - ma v gl = 7v input level of v1~v5 vx avdd/2- avdd-0.1 - v input level of v6~v10 vx 0.1- avdd/2- v note (1): hsync, vsync, de, digital data note (2): be sure to apply the power voltage as the power sequence spec. note (3): dgnd=agnd=0v,) www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 16 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.2 back-light unit the backlight system is an edge-lighting type with 21 led. the characteristics of the led is shown in the foll owing tables. item symbol min. typ. max. unit note led current il 140 ma (2) led voltage vl 10.5 v operating led life time hr 20,000 hour (1)(2) note (1) led life time (hr) can be defined as the t ime in which it continues to operate under the condition: ta=253 o c, typical il value indicated in the above table until the brightness becomes less t han 50%. note (2) the led life time is defined as the modu le brightness decrease to 50% original brightness at ta=25 and il=140ma. the led lifetime could be decreased if operating il is larger than 1 40ma. the constant current driving method is suggested. led light bar circuit lcd module white(ground) black a power supply 1 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 17 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. note (3) suggested schematic of led back-light driv er suggested schematic of led back-light driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 18 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.3 ac characteristics item symbol min. typ. max. unit note dclk cycle time tcph 25 ns dclk frequency fclk 30 40 mhz dclk pulse duty tcwh 40 50 60 % vsd setup time tvst 8 ns vsd hold time tvhd 8 ns hsd setup time thst 8 ns hsd hold time thhd 8 ns data setup time tdsu 8 ns data hold time tdhd 8 ns de setup time tesu 8 ns de hold time tehd 8 ns horizontal display area thd 800 tcph hsd period time th 928 tcph hsd pulse width thpw 1 48 tcph hsd back porch thb 40 tcph hsd front porch thfp 40 tcph vertical display area tvd 480 th vsd period time tv 525 th vsd pulse width tvpw 3 th vsd back porch tvb 29 th vsd front porch tvfp 13 th www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 19 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.4 timing diagram of interface signal tvst tvhd thst thhd th clkin vsd hsd // // // 30% 30% 30% 30% 30% 30% data 2nd data // last data 30% tdsu first data 70% tdhd 70% 30% tcph tcwl tcwh 1 2 last clkin 30% 70% 30% 30% 30% den // 70% tesu // // sampling clock timing - - - - - - - - active area (t hd ) total area (t h ) 0 2 3 4 6 5 7 - - - - - - - - hsd clk (hv mode ) (de mode) - 8 - 1 b b b b b b b b den d07~d00 h pulse width (t hpw ) r r r r r r r r h blanking (t hb ) h front porch (t hfp ) - - - - - - - - - g g g g g g g g - - - - - - - - - b b b b b b b b - - - - - - - - - g g g g g g g g - - - - - - - - - r r r r r r r r d17~d10 d27~d20 d07~d00 d17~d10 d27~d20 horizontal display timing range www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 20 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. vsd hsd tvb tvpw de tv tvd tvfp vertical timing www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 21 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.5 power sequence item min. typ. max. unit t0 0.5 -- 20 msec t1 16 msec t2 20 msec t3 10 msec t4 10 50 msec t5 50 msec power on sequence: vcc-> avdd -> vgl -> vgh -> data -> b/l power off sequence: b/l-> data -> vgh -> vgl -> avd d -> vcc notes: data include r0~r7, g0~g7, b0~b7, hsd, vsd, dclk, shlr, updn , de mode, rstb, stbyb, shlr, updn, dith t 10% 90% level define www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 22 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 6.6 gamma circuit www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 23 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+80 o c, 240hrs 2 low temperature storage ta=-30 o c, 240hrs 3 high temperature operation ta=+70 o c, 240hrs 4 low temperature operation ta=-20 o c, 240hrs 5 high temperature and high humidity (operation) ta=+60 o c, 90%rh, 240hrs 6 thermal cycling test (non operation) -30 o c(30min) +80 o c(30min), 200cycles 7 electrostatic discharge 200v,200pf(0 ) 1 time/each terminal 8 vibration 1.random: 1.04grms, 5~500hz, x/y/z, 30min/each direction 2. sine: freq. range: 8~33.3hz stoke: 1.3mm sweep: 2.9g, 33.3~400hz x/z: 2hr, y: 4hr, cyc: 15min 9 shock 100g, 6ms, x, y, z 3 time for each direction jis c7021, a-10 (condition a) 10 vibration (with carton) random: 0.015g^2/hz, 5~200hz -6db/octave, 200~400hz xyz each direction: 2hr 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there is no display function ng issue occurr ed, all the cosmetic specification is judged before the reliability stress. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 24 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 8.0 outline dimension 8.1 outline dimension u u nit : mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 25 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 26 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 9.0 lot mark 9.1 lot mark 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control co de. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 mark 9 0 1 2 3 4 5 6 7 8 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) the label is attached to the backside of the lc d module. (2) this is subject to change without prior notice. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 27 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 10.0 package specification 10.1 packing form (1) package quantity in one carton: 80 pieces. (2) carton size: 464 5 mm 360 5 mm 370 5 mm. 10.2 packing assembly drawings www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 28 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the module. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. www.datasheet.net/ datasheet pdf - http://www..co.kr/
hannstar display corp. document title HSD070IDW1-A10 specification for page no. 29 / 29 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation . it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar dis play corporation. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may causes def ormation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mouting holes arra nged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2. because lcd module use cmos-ic on circuit b oard and tft-lcd panel, it is very weak to electrostatic discharge. please be careful with electrostatic discharge. persons who handle the module should be grounded t hrough adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of HSD070IDW1-A10

	To Download HSD070IDW1-A10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .